Supports Unified Extensible Firmware Interface (UEFI) Supports hardware monitoring and Watchdog function Supports boot from M.2 SSD cards, USB devices and SD card readerĪMI BIOS in 8 MByte EEPROM with SPI interface Supports up to three independent screens:ġ) DisplayPort 1.2 supports Ultra HD 60 HzĪll capacitors are high quality solid capacitors Supports Quick Sync Video and Clear Video HD technology Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 Manufacturing process: 3rd-generation enhanced 14nm++ System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset requiredįCBGA1528 package - directly soldered onto the mainboardĬode name: Whiskey Lake U (8th Generation Intel Core) It is compatible with Windows 10/11 (64-bit) and Linux (64-bit). This barebone system comes without operating system. The maximum operating temperature is 35 ☌ then. However, there are no rubber feet on the device. Note: From a thermal point of view horizontal operation is permitted. Threaded holes (M3) at both sides of the chassisġ) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).Ģ) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit. Two holes for Kensington Lock and numerous The bays for memory, 2.5' drive and M.2 cardĬan easily be accessed by removing two cover plates.ĭimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres Without cooling fan, passive cooling only

If a hard disk is installed, this must also be approved for permanent operation by its manufacturer Free circulation of air amongst the PC must be guaranteed. This device is approved for 24/7 permanent operation. Power consumption in idle mode with 2.5' SSD under Windows 10: ca. Please feel free to call us on +31174-290717 or email us at you can fill in the contact form and we will contact you the following work day.Perfect to be used in noise-sensitive environmentsįanless, dust-free and thus virtually maintenance-free Would you like more information or are you interested in what we can do for you? We have developed the repair set for that. Of course, in an emergency it is advisable to close the gap quickly and from the inside. For more information visit the repair shuttle information site or watch our product video on YouTube. The entire repair equipment complies with CE and machine directives. Move the Repair Shuttle to another roof section with a service platform that runs on rails outside the greenhouse. The shuttle is equipped with rails with two roller guides to which you can attach the supplied safety harnesses and self-tensioning roller belts. Due to the folding work platforms, the shuttle easily drives over the (partially) opened windows. The repairs take place from the outside of the greenhouse. There is a glass lifting frame with suction cups on top that lifts the window out of the box and lowers it above the repair site.

This lift is used again later to remove the broken glass. The glass is carried up with our glass lift, then tilted and loaded onto the shuttle. The shuttle takes the glazers, with materials, to the right spot where they can work safely. This makes it possible to reduce the number of accidents on greenhouses. Maintenance or quickly replacing a broken window is possible with the Repair Shuttle without the risk of an accident. No one is allowed to access the greenhouse roof without safe equipment. The certified solution for safe glass repairsĮven though there is clear legislation to prevent serious accidents, they occur every year due to dangerous working practices when repairing glass on greenhouses.

Shuttle for windows